RESUMO
Objective: The purpose of this study was to evaluate the microtensile strength of composite bonded to interpenetratingpolymer network (IPN) or cross-linked glass fibre posts and to observe the failure modes by using light and scanningelectron microscopy. Methods: Twenty posts containing IPN resin matrix and 20 posts containing cross-linkedepoxy polymer matrix were used for testing. One half of the posts from each type was treated with Stick Resin, theother half was treated with OptiBond. Composite resin was used to build up a block on the bonding surface. Tensilestrength data was analysed statistically using the non-parametric Kaplan-Meier survival analysis. The distributionof failure modes as a function of post type/bonding agent was evaluated using the ÷² test. Results: The mean tensilestrength values were lower for the groups bonded with OptiBond and higher for the groups bonded with Stick Resin(p = 0.017), the type of post used had no statistical significance (p = 0.263). All the IPN posts showed cohesivefailure within the post The cross-linked posts demonstrated a higher number of adhesive failures and lower numberof cohesive failures within the post (÷² = 0.0001).Conclusions: Stick Resin was more effective than OptiBond in bonding composite cores to fibre posts. Post fracturewas the failure mode of IPN posts, debonding of the composite core was the failure mode of most of cross-linkedposts. These different failure modes may appear clinically in endodontically treated teeth restored with the post typestested in this study (AU)
